ARDEX WPM 001

Single component undertile waterproofing membrane
Meets Green Building Council of Australia Green Star IEQ-13 requirements
Fast drying one part acrylic membrane

Images and Videos

Information
Information ARDEX WPM 001

A tough, ready to use waterproofing membrane specially designed for use under tiles.

CSIRO Appraisal # 91

Advanced acrylic polymers – will not re-emulsify

Compatible with ARDEX tile adhesives

Fibre reinforced – no need for reinforcing mat

Low VOC content – meets Green Building Council of Australia Green Star IEQ-13 requirements

Substrates:

Concrete, renders and screeds

Wet area compatible fibre-cement sheet, plywood and plasterboard
Technical Data
Technical Data ARDEX WPM 001

Location:

Internal wet areas, balconies and other areas that will be tiled or protected from regular foot traffic

Surfaces:

Walls

Floors

Colours:

Blue viscous paste

Coverage:

One 20kg unit covers approx 7.5m² to 15m² (2 coats)

Floors 7.5m² (2 coats) D.F.T. – 1.0mm

Walls 15m² (2 coats) D.F.T. – 0.5mm

Pack Size:

6.5kg

20kg

Drying Times:

Recoat time: 1-2 hrs

Ready to tile: 48 hrs

Full cure: 3 days

VOC content:

18g/L
Downloads

Downloads ARDEX WPM 001

Technical Datasheet

Safety Datasheet

VOC
Calculator
Note: Coverage will vary according to method of application, substrate condition, and on site conditions, the above is designed for guidance only. For more information, please view the product datasheet.
Select Membrane*
Click on the box to see a list of membrane options
Enter area to be covered (m2)
(type in the square metreage number only)
Select Walls or Floors
(click on the box to see options)
Total kg of product required:
Size 6.5kg Kit
Approximate Units Required (round up to the nearest whole number)
Size 20kg Kit
Approximate Units Required

ARDEX WPM 001

Information ARDEX WPM 001

Technical Data ARDEX WPM 001

Downloads ARDEX WPM 001